Serving NYC & Long Island
info@nycstonecare.com
24/7 Availability
Hear from Our Customers
You get surfaces that look like they just came out of the factory. Not “good enough” or “better than before” actually restored to original condition.
That means no visible cracks where your marble countertop chipped near the sink. No dull spots on your limestone floor where scratches killed the shine. No mismatched patches that scream “this was repaired.”
The difference comes down to technique. We use diamond abrasive grinding to remove surface damage, UV-cured formulas that create watertight repairs, and color-matching expertise that accounts for the natural veining in your specific stone. You’re not covering up damage you’re reversing it.
Most stone floor repair in SoHo costs $10-25 per square foot. Compare that to full replacement, which runs into thousands for materials alone, plus demo, disposal, and installation. You’re looking at saving 60-80% while keeping the original stone you already invested in.
We’ve been handling stone damage repair in SoHo since before it became the luxury residential market it is today. We’ve worked on everything from cast-iron district brownstones to modern high-rises along West Broadway.
SoHo properties average over $4 million, and natural stone is a major part of that value. Owners here don’t accept mediocre work, and neither do we. Our techs go through intensive training on the latest restoration techniques, and we’ve built our reputation on landmark-quality craftsmanship.
We’re a family-owned company, not a franchise. When you call for stone crack repair near you, you’re getting the same crew that’s restored museum-grade installations across the tri-state area.
First, we assess the damage. Chips, cracks, lippage from uneven installation, dullness from surface scratches each issue requires a specific approach. You’ll know exactly what needs to happen before we start.
For stone chip repair in SoHo, we clean the damaged area, apply a UV-cured resin that’s color-matched to your exact stone type, and cure it with ultraviolet light. This creates a molecular bond that’s as strong as the original material. Then we grind and polish the repair flush with the surrounding surface.
Stone crack repair follows a similar process but requires filling the entire crack channel to prevent moisture infiltration. We use flexible resins for cracks that might experience slight movement, especially on floors.
If your stone has lost its shine from years of foot traffic or improper cleaning, we use diamond abrasives in progressively finer grits to remove the damaged surface layer and expose fresh stone underneath. Then we polish it back to the original factory finish matte, honed, or high-gloss, depending on what you started with.
The whole process is done on-site. No need to remove countertops or rip up floors.
Ready to get started?
You get repairs that work on all natural stone types: marble, granite, limestone, soapstone, slate, and terracotta. Each material has different hardness levels and porosity, which affects how we approach the repair.
In SoHo, we see a lot of Carrara and Calacatta marble in kitchens and bathrooms beautiful stone, but soft enough to chip easily around sinks and tub edges. We also work on granite countertops in commercial spaces along Broadway, and limestone flooring in historic buildings that need lippage correction from settling.
Every job includes surface preparation, damage repair using UV-cured materials, diamond grinding if needed, and polishing to match your existing finish. We also handle etching from acidic spills, which is common on marble bars and countertops in SoHo’s restaurant scene.
You’re not paying for a temporary fix. The resins we use are the most advanced formulas available watertight, stain-resistant, and durable enough for high-traffic areas. We don’t leave until the repair is invisible and you’re completely satisfied with the result.
Yes, when done correctly. The key is using UV-cured resins that bond at the molecular level and grinding the repair flush with the surrounding surface.
Most failed repairs you’ve seen were done with epoxy that sits on top of the stone or doesn’t match the color properly. We use resins specifically formulated for natural stone, and we mix custom colors to match your exact stone type, including the veining pattern if it runs through the damaged area.
After the resin cures under UV light, we grind it down using the same diamond abrasives we’d use to refinish the entire surface. This blends the repair seamlessly. Then we polish it to match your existing finish whether that’s a matte hone or a mirror gloss.
You won’t see a line where the repair meets the original stone. You won’t feel a height difference when you run your hand over it. If we’ve done our job right, you’ll forget where the damage was.
Professional stone repair in SoHo typically runs $10-25 per square foot, depending on the extent of damage and stone type. Replacement costs 5-10 times more once you factor in materials, demolition, and installation.
A cracked marble countertop might cost $300-600 to repair. Replacing that same countertop with comparable material could easily hit $3,000-8,000 for a standard kitchen, and significantly more if you’re dealing with exotic stone or custom fabrication.
The math gets even more favorable with floors. Repairing lippage or cracks in a 200-square-foot limestone floor might cost $2,000-4,000. Replacing it? You’re looking at $15,000-30,000 minimum, plus the hassle of living through a demolition and installation that takes your kitchen or bathroom offline for days.
Stone chip repair near you is almost always the smarter financial move unless the damage is so extensive that the structural integrity is compromised which is rare.
Absolutely. UV-cured resins are engineered for durability in exactly those conditions.
The resins we use are watertight, which matters around sinks and anywhere moisture is present. They’re also heat-resistant enough for normal kitchen use though you still shouldn’t put a hot pan directly on any stone, repaired or not.
In terms of hardness, cured resin approaches the strength of the stone itself. It won’t chip out or crack under normal use. We’ve repaired stone surfaces in commercial kitchens and high-traffic building lobbies that see thousands of people daily, and those repairs hold up year after year.
The bigger risk to longevity is improper cleaning after the repair. Harsh chemicals and abrasive cleaners can damage both natural stone and repair materials. Stick to pH-neutral stone cleaners, and your repair will last as long as the original surface.
Most residential stone repair jobs in SoHo take 2-6 hours, depending on the number of repairs and whether we’re also refinishing the surrounding area.
A single chip repair on a countertop might take 1-2 hours once you account for prep, color matching, application, curing, and polishing. Multiple cracks on a floor could take half a day, especially if we’re also addressing lippage issues where tiles meet unevenly at grout lines.
Full floor refinishing which involves grinding down the entire surface to remove scratches and restore shine takes longer. A 200-square-foot bathroom might take a full day. Larger spaces require more time, but we work efficiently to minimize disruption.
The UV-curing process is fast. Resins harden in minutes under ultraviolet light, so there’s no waiting days for epoxy to set. You can use the surface the same day in most cases, though we’ll give you specific guidance based on your situation.
Chips, cracks, surface scratches, dullness, etching, and lippage are all repairable. Structural failure or stone that’s crumbling from water damage usually requires replacement.
Surface damage anything that doesn’t go all the way through the stone is almost always fixable. That includes chips along countertop edges, cracks in floor tiles, scratches from dragging furniture, and dull spots from wear. We can also fix etching, which is the dull mark you get when acidic liquids eat into marble or limestone.
Lippage is when floor tiles are installed unevenly and you feel a lip where one tile is higher than the next. We grind the floor flat, which removes the problem entirely. This is common in older SoHo buildings where floors have settled over time.
The only time replacement makes sense is when the stone itself is failing like marble that’s delaminating in layers, or stone that’s been saturated with water and is breaking apart from freeze-thaw cycles. But that’s rare indoors. Most damage you’re dealing with is repairable, and repair is the smarter move financially.
We repair every type of natural stone: marble, granite, limestone, soapstone, slate, and terracotta. Each material requires different techniques because of varying hardness and porosity.
Marble and limestone are softer stones, which means they chip and scratch more easily but are also easier to polish back to a high shine. Granite is much harder it rarely chips, but when it does, the repair requires more aggressive diamond grinding to blend properly.
Soapstone is unique because it’s so soft that scratches can often be sanded out by hand. Slate and terracotta are more porous, so we use penetrating sealers after repair to prevent staining.
In SoHo, we see a lot of Carrara marble in residential kitchens, Calacatta in high-end bathrooms, and granite in commercial spaces. We’ve also worked on historic brownstones with original limestone floors and terracotta tile that’s over a century old. Whatever stone you have, we’ve repaired it before.
Local Resources
Useful Links
Other Services we provide in Soho
